Adsorption of Th(IV) from aqueous solution by the graphene oxide nanoribbons/chitosan composite material

Journal of Radioanalytical and Nuclear Chemistry - In order to reduce the potential toxicity to the environment after treatment of radioactive waste water, an eco-friendly graphene oxide...     

12β-Acetyloxyperforatin,a New Limonoid from Harrisonia Perforata

A new A, D-seco limonoid, named 12-acetyloxyperforatin (1), along with three known ones, were isolated from the leaves of Harrisonia perforata. Their structures were elucidated on the basis of spectroscopic analysis, including extensive NMR techniques and computational modelling. These compounds showed no inhibitory activity against the 11β-HSD1 enzyme.     

Cu过量对Cu1+x Al1-x O2(0≤x≤0.04)薄膜结构与光电性能的影响

以单相多晶Cu1+x Al1-x O2陶瓷做靶材,采用射频磁控溅射方法在石英衬底上沉积了Cu过量的Cu1+x Al1-x O2(0≤x≤0.04)薄膜.通过X射线衍射(XRD)、紫外吸收光谱以及电导率的测试,表征了不同含Cu量Cu1+x Al1-x O2薄膜的结构与光电性能.结果表明,沉积态薄膜经退火处理后,由非晶转变为具有铜铁矿结构的纯相Cu1+x Al1-x O2;退火态薄膜在可见光区域的平均透过率约为55;,平均可见光透过率不受Cu含量的影响;退火态薄膜样品的室温电导率随Cu含量的增加而增大,Cu1.04 Al0.96 O2的室温电导率最高,为1.22×10-2 S/cm;在近室温区(200～300 K),退火态薄膜均很好地符合Arrhenius热激活模式.     

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance‐improved and cost‐reduced solid‐solution alloy nanoparticles of the Cu‐Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_xRu_1?x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.     

Fluorescence imaging of Cu(I) in endoplasmic reticulum of live cells and tissue

Science China Chemistry -     

大型偏心结构吊装欠约束问题研究

吊装施工过程中被吊模块的水平度是作业要求的重要指标,通常需要增加配重调平。传统有限元方法需要补充约束以消除单元刚体位移,且需要重复计算平衡方程来求解调平载荷,效率不高。将模块的运动分解为随动坐标系的整体运动以及相对该坐标系的弹性变形,可将欠约束问题化为多体系统的静平衡问题。基于虚功率原理推导了吊装平顺时刻的节点力平衡方程以及相应的切线刚度矩阵,并将配重表示为基础配重与载荷系数相乘的形式。通过对节点力平衡方程求导,得到一组以载荷系数为自变量的微分方程,通过求解微分方程并结合水平度判据,可快速搜寻满足水平度要求的载荷系数。数值算例表明,该方法在解决偏心模块吊装欠约束问题方面具有明显的优势,在确定配重载荷方面具有较快的速度和合理的精度。     

基于内聚力模型的快速荷载下CFRP-混凝土界面剪切剥离模拟

鉴于纤维增强复合材料(Fiber Reinforced Polymer, FRP)已在混凝土结构加固中普遍应用, 能有效提高结构的承载和变形能力. 为揭示动载作用下FRP-混凝土界面的剥离机理, 本文基于ABAQUS平台, 采用内聚力模型模拟CFRP-混凝土界面层, 实现了快速荷载下CFRP-混凝土界面剥离的高效模拟. 结果表明: CFRP表面应变在加载过程中由加载端向自由端方向传递, 随着加载速率的提高, 界面承载能力也随之提高; 界面峰值剪应力也存在显著的应变率效应; 模拟结果与试验结果基本吻合, 说明了新方法的有效性.     

梁柱简化模型在自立塔塔线体系动态响应中的适用性研究

对输电塔进行合理简化可以提高塔线体系动力学仿真的效率。本文给出自立塔梁柱简化模型的计算方法，并提出利用梁柱简化模型计算方法建立自立塔塔线体系整体模型，同时采用桁梁混合模型建立精细化塔线体系整体模型，对两种模型塔线体系静力特性及振型和固有频率等动力特性进行对比分析。以脱冰工况为例，采用生死单元技术将施加在输电线节点上的集中质量单元杀死来模拟脱冰，实现对塔线体系动力学响应的有限元模拟，研究塔线体系简化模型在动态响应中的适用性。结果表明，两种模型弯曲变形误差小，低阶的振型相同，固有频率值误差小，动力特性基本相同；脱冰工况下，自立塔节点位移和塔材内力时程曲线一致，在提高计算效率的情况下，能有效保证计算精度。